1980 Jeep J-10 4x4 Pickup
This is a 1980 Jeep J-10 4 x 4 Pickup Truck in good condition with 71,899 original miles. It has a 360 V8 engine, 3 speed automatic transmission & lock out wheel hubs. It has a fairly new exhaust system, a brand new radiator, brand new stock 4 barrel carburetor, brand new pro comp EX 3000 shocks & steering stabilizer from Summit racing, brand new tailor wires from Summit, brand new spark plugs, distributor cap & rotor. It has brand new brakes & drums all the way around, a new Duralast battery, new water pump, new belts, new pickup coil, new fuel pump, new Warn lock out hubs, brand new Maxxis Buckshot Mudder tires that have about 10 miles on them, on wagon wheels. I also replaced some of the fuel & brake lines. I also had the truck re-wired, so all the lights and blinkers are in working condition. It also has a 4 flat trailer connection in the rear and a class 3 hitch. It has a heavy duty custom bumper that has been tack welded on and will need permanently reinforced. I put a brand new mirror on the driver's side and it has started to surface rust, I also have one for the passenger side that has not been mounted. I had this truck painted a year and a half ago and it has bed liner/rhino liner along fender wells and bottom perimeter. It also has brand new polished aluminum bed rail runners. Brand new air, oil and fuel filters. Clear title.
This Jeep starts up and runs fine, but will need some TLC. It does not have a radio, the air conditioning will need re-charged, the parking brake is not working, but can be fixed. The interior driver's side door handle will need replaced along with the passenger side window crank. I replaced some of the floor board with sheet metal where rusted. It has a small oil leak and does smoke a little. Also, the tie-rods will eventually need to be replaced & realigned. The cable for the hood release is broke. The bed did have some holes inside of it which I tack welded some sheet metal over top of and was going to spray a bed liner over it, but I've just ran out of time with this project truck and am no longer interested in continuing. I have tried to list every possible detail about this vehicle. I also have a 1988 Jeep Grand Cherokee with a 360 V8 and Dana axles that I have used for parts. If vehicle sells for asking price, I will include this parts Cherokee at no additional charge.
Buyer is responsible for pick up or shipping.
Asking price is $4,000 or best offer. Please contact Mike with any questions at 330-414-0613 or via email to firstname.lastname@example.org
. I also have more pictures that I can send you.
*The picture shows a Myers plow set up in the front, this does not come with the vehicle.
Back to JeepTruck.com for Sale
Click on image to enlarge