By listing with JeepTruck.com you can target your ad to readers who are genuinely interested in your vehicle not bargain shoppers.
Avoid the hit and miss of Auction style listings where your ad is posted for a short time hoping the right person will see it. Then
each time you relist your item it costs you more. Get the price your looking for by listing your ad for free (no fees or commissions)
here at JeepTruck.com. All ads will eventually be removed, if you would like to extend your ad or relist please contact us.
Trucks and Parts for Sale
Advertise for Free email me at: marksmith@jeeptruck.com
To Sell your Truck or Part send a description, contact information and any
pictures and I will get them posted. Want ads are welcome to. See what others are saying about our site click on Testimonials. Protect yourself from internet fraud
by visiting our Terms of Use section.
Early 80's computer control system for AMC 258 6 cylinder. System was an early computer controlled feedback
carburetor type. System is in working order and I am parting out the vehicle it is in. Currently installed in 1982
Jeep Wagoneer, but was used in a variety of AMC and CJ applications. System includes the following parts:
Computer control module
Electronic ignition control module
Distributer
Rebuildable Holley carburetor with wiring hook ups
Complete engine compartment wiring harness for the system
Asking $245.00 plus shipping. Call Howard @ 602-686-9792 or e-mail at howardtreinen@ccvonline.com posted 11-14-08
I have a hood for a Willy Station Wagon in excellent condition just needs paint. Located in Abilene, Texas. Kent 325-665-8150 posted 9-24-08
For Sale an M 715 frame and pickup body located in Connecticut. best offer Contact Keith at 860-485-1594 or e-mail at this adress. wendell1954@yahoo.com posted 8-8-08
INVENTORY REDUCTION
Headliners (3 available)
Rear-slider windows(3 available)
Door panels (various colors)
Tailgates (9 available)
Emission parts for 70's models
Grilles
3-piece bumpers (painted and chrome)
Type 1 step bumper(chrome) fair condition
T-15 trans/20 transfer
T-18 trans/20 transfer
Dana 60 rear (3.73 ratio)
Dana 44 front axles
Dana 44 rear axle
J-20 brake drums and rotors
Factory AM/FM/8-track radio for J-series
Drive shafts (rear)
Re-buidable 360 blocks
1 new 304/360 crankshaft
Complete body sides for 2-door Cherokee(1 w/flare)
Various stainless trim pieces
Located SE Pennsylvania. E-mail dave82c20@verizon.net for more info. Pictures available. posted 7-23-08 Parting out 1987 Grand Wagoneer. Good running 360, new transmission,
new transfer case, many good body, suspension, and interior pieces.
Complete under dash air conditioning assembly. No front axle. Located
in Clemson, South Carolina. 864-639-6266 Ask for Daniel. posted 7-17-08
I have a willys 4 cyl CJ2A good running motor for sale. hooked up to a hobart welder. motor runs, welder don't.will help you remove from welder after you hear it run.
sold as is, where is. you pick up. .questions answered.!! email: FROG04928@aol.com posted 6-12-08
Have several Waggies & GW's parted in ND; mostly 1974-1986. Also 77 WT Chero with 4 speed to part out.Dan, AIS Eq Inc, ND 701-839-5820 posted 4-24-08
Willys 47-49 entire front clip for a flat nose truck or wagon. Sandblasted, primered with no rust.
Great headlight retainers and bezels and parking lights included $1000.00
email: Gary.Collins@o-i.com 814-261-2490 Home 814-590-7732 cell posted 4-6-08 NOS HEAVY-DUTY FRONT, "PUSH", BUMPER, ORIGINAL JEEP FACTORY, FSJ-TRUCK's & (M715's ?) posted 1-15-08
THIS FSJ-TRUCK's & (M715's ?), ORIGINAL, JEEP FACTORY, N.O.S-(NEW-OLD-STOCK), HEAVY-DUTY,
FRONT BUMPER, WITH HEAVY-DUTY-RUBBER-PUSH-PAD-BUMPER-GUARDS, (WAS MADE BY THE CANFIELD
COMPANY FOR JEEP CORPORATION). HAS NEVER BEEN MOUNTED, OR USED. JEEP OFFERED THIS FRONT BUMPER,
ON IT'S GLADIATOR PICKUP TRUCKS, THAT HAD HEAVY-DUTY SUSPENSIONS. I'D SAY, THAT WITH MINOR
BRACKET MOUNTING MODIFICATIONS-(IF, NEEDED, AT ALL), THIS BUMPER COULD FIT, ALL YEARS OF FSJ,
JEEP's, GLADIATOR's, J10's & J20's... Ect., CHEROKEE's & CHEROKEE-(WIDE-TRACK's), & WAGONEER's
& GRAND-WAGONEER's, WITH HEAVY-DUTY-SUSPENSIONS. THEIR ARE CUT-OUTS ON THE TOP & BOTTOM,
FRONT-CENTER OF THIS BUMPER, THAT I THINK ARE FOR WINCH-MOUNT-CLEARANCE OR SNOWPLOW- MOUNT-CLEARANCE.
BUMPER IS PAINTED & STILL HAS THE ORIGINAL JEEP FACTORY FLAT-BLACK, TYPE OF PAINT COLOR &
BLACK-HEAVY-DUTY -RUBBER-PUSH-PAD-BUMPER-GUARDS. THERE IS SOME LIGHT SURFACE RUST FROM SITTING
IN A UNHEATED STORAGE WAREHOUSE ALL THESE YEARS. THE HEAVY-DUTY-RUBBER-PUSH-PAD- BUMPER-GUARDS
ARE ALL READY MOUNTED TO THE BUMPER-(FROM THE JEEP FACTORY). THE MOUNTING BRACKETS ARE INCLUDED
WITH THE BUMPER. DON'T HAVE ANY OF THE MOUNTING HARDWARE-(BOLTS, NUTS, WASHERS,...ECT.) NO MOUNTING
OR INSTALLATION DIRECTION SHEET(S). BUMPER WOULD HAVE TO BE PICKED-UP, (WILL NOT SHIP), WILL NEED
TO BE PICKED-UP NEAR JANESVILLE, WISCONSIN. ASKING = $475.00 = Or-Best-Offer,
Thanks & "Keep~0n~Jeep'N", Please, Contact, FullSizeR, at: JEEP-PARTS-SITE STORE jeep-parts-of-allsorts.ebay-stor@earthlink.netFor Sale - 1959 willys 4x4 pickup parts (can be used on waggon) posted 12-15-07
-original jeep powertilt(and lift) plow includes mounts and(plow) frame no pits, dings or such any where -600$
-wheels(x5)and tires 50-65% tread rims great-100$
-trans(3spd) and transfercase work well, no problems-200$
-front axel,no probslems-100$
- rear axel, no problems- 100$
-suspensiongood shape, need only shocks -front-100$ rear-100$
-driveshaftsseem good-50$ each
-seat only 1 rip no waer-50$
-brakes(brakes, master cylinder, brake lines ect) need work(but not that mutch)-100$
-steering colum(colum box no steering wheel)-50$
-tierods-25$
-and other small parts
-all for 1500$
call greg at 518-695-3604 between 3 and 8 pm any day for detals or to buy you pick up.
willing to trade for old engines briggs hit+miss other jd (2cyl) or combination with
or without money(e-mail pics of posible trade) @ countrypwr4@yahoo.com
1958 jeep truck rolling chassie 226 super hurricane motor all of the running gear works great.I will sell the whole thing or just parts.
Thanks for looking
Pat Avery
email: arodeo1@cox.net phone: 225 405 5984 posted 10-26-07
FOR SALE as a pair: $900.00
1- M715 FRONT AXLE - DANA 60
1- M715 REAR AXLE - DANA 70
LOCATION - ASHEVILLE, NC
email: curtfurtado@yahoo.com 910-545-4333 posted 10-24-07
I have a 1971 Jeepster. I ended up with what I am told is an early FSJ Fuel filler hose. pt.# j0938036 I would like to sell it for $100 + S&H Jerry - cabanaboy3169@aol.com posted 10-9-07
5 NEW 31" TIRE AND RIMS FOR JEEP
email: Caveat333@yahoo.com posted 10-9-07 M-715 Series Truck Parts - For Sale partial listing of the inventory we have for sale
email: deanfitzgerald@heavytimber.net posted 10-9-07 230 OHC motor fom Jeep gladiator thriftside truck. Ready to assemble, new
old stock parts still in box. Looking for a good home email: dpro_2@hotmail.com posted 10-9-07 Warner T-86AA transmission new in the box for Jeep CJ $1800 or best offer.
Call Steve 708-863-3090 or email: michaelinespatuzza@yahoo.com posted 10-9-07
Jeep J-10 parts For Sale:
7' bed off a 1980 Jeep J-10 with tail gate, some rust but not bad at all. Very fix-able. $ 600.00
3 Tail Gates off 1980-1985 Jeep J-10. $ 150.00 each
Hood off 1985 Jeep J-10. $ 100.00
These parts are all located in Massachusetts. Please contact Peter at: oakknoll@comcast.net posted 10-9-07
Xtreme Terrain Concepts we are a discount retailer of quality aftermarket jeep parts and accessories. We offer a large line of Jeep parts and accessories
from axles, lift kits, bumpers, fuel tanks, brakes, etc....you name it. Since 1989. XtremeTerrain.com posted 10-9-07
I have a Ramsey winch off a about 64 Jeep Gladiator with brackets for sale. If someone is restoreing one may be
interesting parts to compleate there project. The tag has x 246-14r 8000 67 6on it. The two cast brackets
have 62155rh and 62156lh on them.The power take off is cast 73002, and it is for a dana 20. Asking $350.00 plus shipping.
I know it's a heavy piece to ship. I'm located in Canada. Click here for pics My email is wlandry@telus.net posted 10-9-07
REPRODUCTION PICKUP BOX FRAME SKIRTS,20 GA. STEEL.FITS 48-64 WILLYS
PICKUP.MADE IN VERMONT.DRILL YOUR OWN MOUNTING HOLES. $150.00 PLUS
$14.00 UPS. EMAIL btequip@pshift.com or OR CALL 802-754-2978 [8-5EST]
GLENN posted 10-9-07
4 X 4 - Truck - Jeep - SUV - Parts, Accessories, Installation & Service. Come by our retail store or SHOP ONLINE! www.southernoffroad.com posted 10-9-07
Looking for a 74 J20 for parts or to put parts into. Have a 74 right now looking to rebuild. Live in South Dakota so anywhere half ways close would help. email: farm_52@hotmail.com posted 11-19-08
I'm looking for body parts for a 1951 Willys pickup truck (such as fender, doors, hood, truck box, etc.). Contact Brian at arctic.brian@gmail.com posted 10-25-08
I need to find a short bed for a Jeep truck, townside, thriftside, or
sportside, for a friend of mine. Needs to be in decent shape. Any help
would be greatly appreciated. email me at jeepjeepjeepster@yahoo.com posted 10-22-08
I have a 1968 M 715 every day driver and I want to lock the
doors. Does anyone have door handles/locks off of a parted out
Gladiator. Please let me know buckjrw@bellsouth.net posted 10-14-08
Top dollar for a J-series Jeep truck in excellent condition. Prefer later model in original condition, any trim; but light modifications acceptable. Contact Martin (dermodad@cableone.net or dmjohnso@collom-carney.com or 903-733-7339). posted 9-24-08
I have an excellent 1967 M725 Kaiser Ambulance and am trying to locate the rubber boot between the filler neck and the gas tank. Michael Brink (248) 399-6981 Madison Heights MI Pendragon1311@wowway.com posted 9-22-08
I'm looking for a eight foot bed for a 1976 AMC Jeep J-10 pick up with tailgate. Bill Hoover email: hoov936@aol.com posted 9-5-08
I am searching for a rear glass and rubber seal for my 1970 Jeep J-2000 series Gladiator. I would prefer a tinted slider if available. Please contact Don at 336-998-0100 or djm@carolinasurveyor.com if you can help! posted 8-18-08
Looking for new parts for J10 1978
-windshield and backglass rubber
-window channel
-side marker lights
-turn signal lens (front)
-brake lens (back)
-front and rear chrome bumper
If you know where I can find these parts please contact me at: tonyfigue46@yahoo.com posted 8-13-08
I have a 1971 J4000 pickup. I am looking for a gas tank, the cardboard
glove box insert, reverse backup lens, pair of door panels, windshield gasket and weather stripping
for all the windows, and a owners manual. Any help would be
greatly appreciated. contact John email: djwaggoner@gmail.com posted 7-28-08
Looking for parts for a 1970 Willys truck J4000 Please call Tony Smith 678-598-2094 posted 4-27-08
I'm looking for a pto driven welding machine and the pto parts for it, for my CJ3A email: jalopy69@sbcglobal.net posted 4-27-08
Currently have a couple pickups coming up to restore; 1964 J300 long box 230ohc/3spd & 1976 Honcho J10 Levi short box 401/4v at ps pb cc tilt air hi/low.
Here are some of the parts I am having trouble locating:
For the 1964; & some of the below will also be needed for the '76:
Replacement floor pan sheet metal, All rubber for any part of truck (incl windsheild & backglass)
window run channels & "cats whiskers",
reproduction gold/tan color seat upholstery; & repro. door panels. (will have SMS in Oregon make me new,
if don't find excellent or NOS)
insulation for inside cab; on cowl & push in plastic fasteners for same
white wire loom holders; that go through hole in fender/cowl etc. & snap back into themselves.
hood insulation, one peice door sills or step plates for under doors
Speedometer glass, steering wheel, gold/tan door lock inside knobs
any other parts / materials you may have avail; that will fit this.
Quality sand or soda blasting device manufacturer; have couple sand blasters now & am less
than impressed with their quality & / or performance.
Thanks, Dan, AIS Eq Inc, ND 701-839-5820 posted 4-23-08
I need a 1974 j10 transmission has 4014 V stamped on the tranny my email is cmorris@redline07.com if you have one let me know
Thanks Curtiss Morris posted 4-23-08
I have a 65 jeep gladiator j200. I need the windshield, rear window, and side window glass. I do not need the vent wing windows though. any help locationg parts would be greatly appreciated.
chris email: powrjunkey@aol.com posted 2-22-08
I own a 1967 jeep M715 military truck but the tailgate is missing so I am looking for one, I hope someone can help me.
Thanks for your cooperation. Frank, Farmington, Michigan State email: juliemba12@gmail.com posted 2-14-08
I'm looking for an oil pan for my L6-226 Ted at 970-214-2639 posted 2-13-08
Gladiator parts needed chrome washer knob, plunger style. Amber door panels,headliner, seat cover, glovebox door w/ clock hole.
Also lookin for Clardy or American Air underdash AC for early Gladiators. email Dennis Dennis@brownriggins.com posted 12-24-07
I have a 1968 jeep pickup j 2000. I need a tie rod adjusting sleeve.. call mike at 818-279-0723 or email clubbymike@hotmail.com. posted 12-24-07
Wanted: A 1963 to 1965 Kaiser Jeep Pickup in fair condition with an original Tornadoe engine and an automatic transmission. Looking for something reasonable priced and close to, or deliverable to Southern WV. Email DBowles@Hughes.Net posted 11-28-07
My brother is interested in a 79 Golden Eagle J10 to purchase. Please forward any responses to me please. e-mail Nkstorey@aol.com posted 11-26-07
Wanted - rear bumper for 1979 J10 Truck. Contact e-mail is bswest1@cox.net posted 11-16-07
I have a 1978 Jeep J10 that I am needing patch panels for the back of the bed on both sides behind the fenders. if you know where I could find some please let me know.
email Justen at redsox_fan_09@yahoo.com posted 10-29-07
I'm looking for J10 seats. If you Know someone who sell them please contact me. email : giampaolo@pianofocale.it Giampaolo posted 10-12-07
I am looking for a J20 or Willy’s pickup, reasonably priced, doesn’t have to be in “perfect condition” but running is good. I can travel with in New England Region but if not
preferably this side of the big Mississippi. What’cha got? Contact info: gabby512@hotmail.com posted 10-9-07
Wanted Turn signal cancel CAM for a 1984 CJ7 JEEP. Contact rdshearman@sbcglobal.net posted 10-9-07
Nice, original RED Gladiator with either the 327 or buick 350. Also pay top dollar for a RED SWB 199" J-10 Laredo with
the AMC 360. posted 10-9-07
Need some help finding a 1985 JEEP J20 "BUCKLE" (OEM#J5766505). Thanks Robert Sandford email: alaxies@sbcglobal.net posted 10-9-07
Seeking windshield j4000 will pay reasonable price plus shipping
must be properly crated 248-379-1102 phil orlowski michigan email: philorlo@yahoo.com posted 10-9-07
Wanted tail lights lens left and right for jeep j10 1982, 4.2L 6 cyl. stickshift
email back: us911ny@yaoo.com posted 10-9-07
I have a j200 jeep truck with 230 overhead cam. I'm seeking information to
change over from points to solid state ignition. If you can help me email me
at mikesshop@bellsouth.net. it was my grandfathers truck then my dad's now
mine. posted 10-9-07
Wanted: interior door panels for my 1978 Jeep J10. Not too concerned about the color
just the condition and that they both match. Let me know a price and I will pay shipping charge.
Kyle Robertson
Shipping:
1707 S. Main Street
Lebanon, Oregon 97355
541-409-6691
email: kyle@heritagenw.com posted 10-9-07
I own a jeep j20 military truck 1983 but the tailgate is missing so I am looking for one, I hope someone can help me. Peter Pettersson
, from Sweden email: peter.pettersson7@comhem.se posted 10-9-07
Looking for a shifter boot for a 79 J-10 truck.
Contact Mark at Mark.Gerdy@jdmotorsports.com posted 10-9-07
I'M IN NEED OF A TRUCK BED (8 FT) AND TAILGATE FOR MY 1974 JEEP J20 4X4.
Contact JONATHAN at KJJJ745@CFL.RR.COM posted 10-9-07
I am looking for a jeep j10 6 cylinder somewhere in the south
(perhaps between NC and louisiana) to buy later this summer. Its
doesn't have to look special, just run well. My email is
michael.heaney@gmail.com, don't hesitate to contact me! posted 10-9-07
Wanted: Good running 226 super hurricane flat head for 61 Willys Wagon. I am in eastern Iowa.
E-mail Pat bustrbyte@yahoo.com posted 10-9-07
I AM LOOKING FOR A DASHBOARD PAD FOR A LATE 70'S EARLY 80'S J-SERIES PICK-UP." MY EMAIL ADDRESS IS AMCJP@VERIZON.NET posted 10-9-07
I am looking for a meyers plow mount for my 1978 J10. Also a Golden Eagle decal kit for it.
email: badbob@montana.com posted 10-9-07
Looking for a 8ft bed for a J20, hopefully in Florida. Also a lead on where to get new weather stripping that goes around the wing windows. email Bear995@aol.com posted 10-9-07
I am looking for some 230 ohc jeep engines E-mail johnh118@webtv.net posted 10-9-07
Need to find Brake Drums for a 1967 Gladiator J3000 12 X 2 inch 5 Lug Hole. The Hub and Drum and made together.
E-mail mike@southeasternstages.com
cell 404 -216-6621 work 404-591-2755 posted 10-9-07
Wanted: Overdrive unit for '57 Willys 4X4 pickup. E-mail woc_250@suscom.net posted 10-9-07
Parts wanted: 1960's Gladiator dash parts needed. Dask eyebrow moldings, Radio, trim assy around speedo, door panels, wiper switch assy. jeep badge for dash on passenger side.
Bob Yonkee
630-400-7191
trafficja@aol.com posted 10-9-07
Wanted for 1972 J2000: 15X6 rims (5 on 5.5 bolt pattern), Carter YF 1bbl carburetor, air cleaner housing, accelerator cable, decent door panels, and a BW T14a 3 sp. trans.
EMAIL: somanyparts@yahoo.com posted 10-9-07
If you have had a positive experience using our site please send us some feedback so that we may post it here.
email: marksmith@jeeptruck.com
Mark, the 1956 Willys Jeep sold from your listing. Thank you so very much for your help.
Candler
The response that mattered…the one that bought our truck did come from your site. Thanks for the assistance.
Heather Ford
I did get a number of inquiries on the ad and sold it as a result of your ad space. I very much appreciate your help.
Thanks, Wilton Adams
The 69 Jeep J3000 pick-up all original is now sold this website made it possible, I could'nt have done it without it.
Thanks again, John
We are all huge fans of Jeep Truck. We find it a great resource for everything Jeep.
James Carver, Vice President, Grass Roots Jeep Club
I got a ton of inquiries from your site from all over the country. Your site was great with you posting the photo for me since I don't know how to do that stuff.
Thanks, Dean.
You can note my posting as sold. Of interest to you is that I got my asking price. I am very happy with the results.
My thanks to you and your website. keep up the good work.
Chuck Peters
Mark, Thanks for the awesome website. You can mark the truck as sold.
Jay Abbott
I just bought a j20 and I've been pretty much reading everything about them and I recently ran across your website and it is full of the best links. Thanks.
Bridgette
Thank you for listing this truck for me and I will pass on information on the site
to all my friends with jeeps.
Allan Sasson
I would like to say thanks to you and your website, it brought me many interested
Jeep Lovers and finally I found the right one that wanted my Jeep and is going to
take care of it. I appreciate your services and would recommend to anyone.
David Elliott
I wanted to let you know that the 1987 J20 Pioneer has been sold.
It went to a good home with six other Jeeps.
I appreciate you posting it on your site.
It's nice to see a good quality web site for Jeeps.
Thanks, John
I just wanted to let you know that I absolutely enjoy your the web site;
it has been a wealth of resources and just good ole fashioned reading. I
really appreciate the time and effort you have put into the site for all
of us that admire and love the Jeep Trucks. thanks again for your great
web site and service
Dave
One of the buyers had seen the tonneau cover ad listed on your web-site.
"Thanks", for your free ad listing web-site.
Butch
My truck sold it is the green one you had on your main page for a long time.
small back window thriftside with 100k on the ticker. Thanks for the great site!
I just wanted to let you know that the M715 that you have at the top of
the for sale list is sold. I purchased it last weekend. I'm really
happy with it. Thanks for posting these great trucks!
Jay Logan
I have sold and delivered my truck to a happy new owner this week. So
thank-you very much for hosting it on your great website!
Jim Leonetti
As always, our ads are free to our readers. However, they are not free to us so if you would like to make a donation
to support our site Please click on the safe and secure PayPal link below. Thank You from JeepTruck.com
posted 11-20-08 
posted 10-13-08 
updated 10-6-08 
Professional 4x4 & Light Truck Rebuilding Services